Category Archives: Routing and Switching

Creating Serial Console Access in VMware ESXi v5.5

Creating Serial Console Access in VMware ESXi v5.5 1. Power off the VM. 2. Right-click the VM and configure the virtual serial port settings. 2.1 Choose Edit Settings > Add. 2.2 Choose Device Type > Serial port, and Next. 2.3 … Continue reading

Posted in Internet, Linux, Routing and Switching, VMware | Leave a comment

IPv6 automatic 6to4 Tunneling

# IPv6 automatic 6to4 Tunneling # TOPOLOGY # R1 is IPv4 only backbone, R2, R3 and R4 are all connected to R1 over Frame-Relay circuits # Reference 1. IPv6 over IPv4 Tunneling, http://packetlife.net/blog/2010/mar/15/6to4-ipv6-tunneling/ 2. IPv4 to IPv6 Conversion, https://www.ultratools.com/tools/ipv4toipv6   1. … Continue reading

Posted in Routing and Switching | Tagged , , | Leave a comment

OSPF over Frame-Relay, configure OSPF over Frame-Relay point-to-point PVC

# OSPF over Frame-Relay, http://gns3vault.com/Frame-Relay/ospf-over-frame-relay.html # TOPOLOGY # There’re three routers connected to Frame-Relay cloud # R14 is HUB, R15 and R16 are SPOKEN # Objectives # Configure OSPF over Frame-Relay point-to-point PVC 1. Create loopbacks on all routers: R14: 172.28.0.14/32 … Continue reading

Posted in Routing and Switching | Leave a comment

OSPF over Frame-Relay, Configure the OSPF network type on all routers to “Point-to-Multipoint non-broadcast”, ensure you still have full connectivity.

# OSPF over Frame-Relay, http://gns3vault.com/Frame-Relay/ospf-over-frame-relay.html # TOPOLOGY # There’re three routers connected to Frame-Relay cloud # R11 is HUB, R12 and R13 are SPOKEN # Objectives # Configure the OSPF network type on all routers to “Point-to-Multipoint non-broadcast”, ensure you still … Continue reading

Posted in Routing and Switching | Leave a comment

OSPF over Frame-Relay, Configure the OSPF network type on all routers to “Non-Broadcast”, ensure you still have full connectivity.

# OSPF over Frame-Relay, http://gns3vault.com/Frame-Relay/ospf-over-frame-relay.html # TOPOLOGY # There’re three routers connected to Frame-Relay cloud # R7 is HUB, R8 and R9 are SPOKEN # Objectives # Configure the OSPF network type on all routers to “Non-Broadcast”, ensure you still have … Continue reading

Posted in Routing and Switching | Leave a comment

OSPF over Frame-Relay, Configure the OSPF network type on all routers to “Broadcast”, ensure you have full connectivity to all subnets.

# OSPF over Frame-Relay, http://gns3vault.com/Frame-Relay/ospf-over-frame-relay.html # TOPOLOGY # There’re three routers connected to Frame-Relay cloud # R4 is HUB, R5 and R6 are SPOKEN # Objectives # Configure the OSPF network type on all routers to “Broadcast”, ensure you have full … Continue reading

Posted in Routing and Switching | Leave a comment

OSPF over Frame-Relay, configure the OSPF network type on all routers to “Point-to-Multipoint”, ensure you still have full connectivity.

# OSPF over Frame-Relay, http://gns3vault.com/Frame-Relay/ospf-over-frame-relay.html # TOPOLOGY # There’re three routers connected to Frame-Relay cloud # R1 is HUB, R2 and R3 are SPOKEN # Objectives # Configure the OSPF network type on all routers to “Point-to-Multipoint”, ensure you still have … Continue reading

Posted in Routing and Switching | Leave a comment